Chimney Flashing and Storm Repair in Nashville and Middle Tennessee
Chimneys leak where the roof meets the brick. Storms bend flashing and crack sealant, and water finds the gap.
- Leaks, Decking and Structure
- Put the roof right
- Middle Tennessee
Chimney Flashing and Storm Repair, explained.
A chimney is a brick column passing through a sloped roof, and every side needs flashing. Step flashing tucks under the shingles, and counter-flashing laps over it from the brick. When any of it bends, rusts or loses its sealant, water gets in.
We re-flash chimneys with new step and counter-flashing, add or repair a cricket on the uphill side where needed and check the surrounding decking for water damage.
Signs you need this
- Leaks appear near a fireplace or chimney
- Flashing is bent, lifted or rusted
- Sealant on a chimney has cracked
- Brick joints around the chimney look damaged
A good fit, and what to know.
We would rather you hear the limits from us than discover them later.
A good fit when
- A chimney is leaking after a storm
- Flashing is visibly damaged
- You want a lasting repair instead of repeated caulk
Worth knowing
- Masonry damage needs a mason
- Old chimneys may have issues beyond flashing
Why do it this way.
Targets a top leak source
Chimney flashing is a classic place for storm leaks.
Done properly
Metal is woven in, not just caulked over.
A cricket where needed
Water is diverted around the uphill side.
Photos
You can see the old and new flashing.
Before and after: leaking chimney to new flashing
AfterBeforeIllustrative scene created to show what a surface view hides and what an inspection reveals. Drag the handle to slide between them.
From first call to finished work.
A clear sequence for every job.
- 01
Inspect all four sides
We check step flashing, counter-flashing, the cap and the cricket.
- 02
Remove failed pieces
Bent, rusted or loose flashing and old sealant are taken off.
- 03
Install new flashing
New step and counter-flashing are installed and integrated with the roofing.
- 04
Seal and check
Details are sealed, and decking beside the chimney is checked.
Services that go together.
A-10Emergency ResponseSkylight and Chimney LeaksSkylights and chimneys are the most common storm leak points after missing shingles.Stage 1: Stop the water
B-11Storm DamageFlashing RepairFlashing seals every joint on a roof.Stage 3: Repair it
C-03RepairsRoof Valley RepairValleys carry the flow of two roof slopes.Stage 3: Repair it
B-01Storm DamageStorm Damage Roof RepairHail, wind, limbs and driven rain damage roofs in different ways.Stage 3: Repair itRead more on this topic.
What to Do When Your Roof Is LeakingA calm, step-by-step guide to the first things to do when water comes through.2 min read 
Temporary vs Permanent Roof RepairWhat each one is, when to use them and how to avoid paying twice.2 min read 
Wind Damage to Roofs, ExplainedHow wind lifts, creases and strips roofing, and where it strikes first.2 min read Chimney Flashing Repair FAQ.
Is caulking the chimney enough?
Caulk may stop a drip for a time. Replacing the flashing is the lasting repair.
Do you repair chimney masonry?
We repair the roof-side work. Masonry repairs are done by masonry specialists.
What is a cricket?
A small peaked structure behind a chimney that sends water around it. Larger chimneys benefit from one.
Chimney Flashing Repair across Middle Tennessee.
Pick your city for its page.
Storm hit your roof? Call before the next rain.
Tell us what happened and where you see water. We will explain the safest next step and how we can cover and repair the roof.