Flat Roof Storm Repair in Nashville and Middle Tennessee
Flat and low-slope roofs hold water, and storms tear membranes, open seams and block drains. We repair the damage and the drainage.
- Leaks, Decking and Structure
- Put the roof right
- Middle Tennessee
Flat Roof Storm Repair, explained.
A flat roof has little slope to shed water, so any opening is a problem, and clogged drains turn small damage into large leaks. Storms tear membranes, push seams open, damage flashing at walls and units and clog drains with debris.
We repair membranes and seams, re-flash penetrations and walls, clear and repair drains and address ponding so the roof sheds water again.
Signs you need this
- Water is ponding on the roof after rain
- The membrane is torn or blistered
- Seams are open or flashing is loose
- Leaks appear below a flat roof
A good fit, and what to know.
We would rather you hear the limits from us than discover them later.
A good fit when
- A flat or low-slope roof is damaged or leaking
- Drains are blocked after a storm
- You want ponding and seams addressed
Worth knowing
- Wet insulation may require more extensive repair
- Very old membranes may call for replacement
Why do it this way.
Targets flat roof failures
Repairs suit the membrane type.
Drainage addressed
Drains and ponding are part of the repair.
Detail focus
Seams, walls and penetrations are sealed properly.
Photos
Findings and repairs are photographed.
Before and after: ponding flat roof to repaired membrane
AfterBeforeIllustrative scene created to show what a surface view hides and what an inspection reveals. Drag the handle to slide between them.
From first call to finished work.
A clear sequence for every job.
- 01
Clear the surface and drains
Debris is removed and drains are checked for blockages.
- 02
Inspect the membrane
We look for tears, blisters, open seams, punctures and ponding.
- 03
Repair and re-flash
Membranes are patched or welded, and flashing is repaired or replaced.
- 04
Check the drainage
We check that water flows to drains and note low spots.
Services that go together.
D-02CommercialCommercial Flat Roof RepairStorms rip membranes, flood roofs and open seams.Stage 2: Make it safe
D-03CommercialTPO and EPDM Emergency RepairSingle-ply membranes fail at seams, flashings and punctures.Stage 2: Make it safe
D-07CommercialWarehouse and Industrial RoofsLarge roofs over stock, machinery and docks cannot wait.Stage 2: Make it safe
B-01Storm DamageStorm Damage Roof RepairHail, wind, limbs and driven rain damage roofs in different ways.Stage 3: Repair itRead more on this topic.
Flat Roof Leaks After StormsWhy flat roofs leak the way they do, and what to check.2 min read 
A Commercial Roof Emergency PlanWhat to decide before the storm, so you can act when it hits.2 min read 
What Counts as a Roof Emergency?How to tell a roof problem that can wait from one that cannot.2 min read Flat Roof Storm Repair FAQ.
Can a flat roof be repaired after a storm?
Usually yes, when the roof is otherwise sound. Wet insulation or old membrane may change the plan.
Why does water pond?
Poor slope, sagging, blocked drains and low spots are common reasons.
Do you repair all membrane types?
We work on common types such as TPO, EPDM and modified bitumen, and we tell you if yours needs a specialist.
Flat Roof Storm Repair across Middle Tennessee.
Pick your city for its page.
Storm hit your roof? Call before the next rain.
Tell us what happened and where you see water. We will explain the safest next step and how we can cover and repair the roof.