Metal Roof Storm Repair in Nashville and Middle Tennessee
Metal roofs are tough, but wind can peel panels and hail can dent them. We repair panels, fasteners, seams and flashing.
- Leaks, Decking and Structure
- Put the roof right
- Middle Tennessee
Metal Roof Storm Repair, explained.
Standing seam and exposed-fastener metal roofs resist storms well, but not perfectly. Wind can lift edges and peel panels, hail can dent them and back fasteners out, and storms can damage trim and flashing.
We re-fasten loose panels, replace damaged ones, repair seams and trim and reseal penetrations. Dents that do not affect watertightness are a matter of appearance, and we tell you which is which.
Signs you need this
- Metal panels are lifted, peeled or missing
- Fasteners are backing out or washers are cracked
- Trim or ridge is loose or damaged
- Hail dented the metal and a leak appeared
A good fit, and what to know.
We would rather you hear the limits from us than discover them later.
A good fit when
- Wind or hail damaged a metal roof
- You see lifted panels or loose trim
- There is a leak around fasteners or seams
Worth knowing
- Matching an older panel profile can be difficult
- Coating damage may need special treatment
Why do it this way.
Right repair for metal
Methods and fasteners that suit metal roofing.
Cosmetic vs functional
We separate dents from real leaks.
Wind-ready
Secured edges and trim resist the next storm.
Documented
Photographs of panels and fasteners.
Before and after: wind-stripped roof to repaired roof
AfterBeforeIllustrative scene created to show what a surface view hides and what an inspection reveals. Drag the handle to slide between them.
From first call to finished work.
A clear sequence for every job.
- 01
Inspect panels and fasteners
We check panels, seams, screws, washers, trim and flashing.
- 02
Secure or replace
Loose panels are re-fastened and damaged ones are replaced.
- 03
Repair seams and trim
Seams, ridge, trim and flashing are repaired and sealed.
- 04
Seal penetrations
Vents and pipe penetrations are checked and resealed.
Services that go together.
D-04CommercialCommercial Metal Roof RepairWind peels metal roof panels and trim.Stage 2: Make it safe
B-11Storm DamageFlashing RepairFlashing seals every joint on a roof.Stage 3: Repair it
B-03Storm DamageWind Damage RepairWind lifts shingles at the edges and ridges first, then tears them away.Stage 3: Repair it
B-01Storm DamageStorm Damage Roof RepairHail, wind, limbs and driven rain damage roofs in different ways.Stage 3: Repair itRead more on this topic.
Wind Damage to Roofs, ExplainedHow wind lifts, creases and strips roofing, and where it strikes first.2 min read 
What Counts as a Roof Emergency?How to tell a roof problem that can wait from one that cannot.2 min read Preparing Your Roof Before Storm SeasonA practical checklist to do each year, before the severe weather arrives.2 min read Metal Roof Storm Repair FAQ.
Do dents mean a leak?
Not necessarily. Many dents are cosmetic, but they can crack coatings or open seams, so we inspect.
Can a single panel be replaced?
Often yes, depending on the system and panel availability.
Do metal roofs need special repairs?
Yes. Fasteners, seams and sealants are different from shingle roofs, and the work should suit them.
Metal Roof Storm Repair across Middle Tennessee.
Pick your city for its page.
Storm hit your roof? Call before the next rain.
Tell us what happened and where you see water. We will explain the safest next step and how we can cover and repair the roof.