TPO and EPDM Emergency Roof Repair in Nashville and Middle Tennessee
Single-ply membranes fail at seams, flashings and punctures. Each type has its own repair method, and using the wrong one means the patch will not hold.
- Commercial Emergencies
- Stabilize and secure
- Middle Tennessee
TPO and EPDM Emergency Repair, explained.
TPO and PVC seams are heat-welded, while EPDM is joined with tape or adhesive. A patch that works on one will not bond to another. Storms puncture, tear and peel back these membranes, and the repair has to match the system.
We identify the membrane, clean and prepare the area and repair with a method that bonds correctly: hot-air welded patches for TPO and PVC, and adhesive or tape-based patches for EPDM. We also repair flashing and curbs.
Signs you need this
- A TPO, PVC or EPDM roof is torn or punctured
- Seams have opened or peeled
- Flashing at a wall or unit has pulled away
- A previous patch failed
A good fit, and what to know.
We would rather you hear the limits from us than discover them later.
A good fit when
- A single-ply roof has storm damage
- You want the right repair method for your membrane
- A previous patch has failed
Worth knowing
- Very worn membranes may not bond well
- Wet insulation needs separate treatment
Why do it this way.
Method matched to material
The repair bonds the way the membrane needs.
Seam checks
Probing finds weak seams before they leak.
Flashing included
Edges and penetrations are repaired too.
Photos
Repairs are documented.
Before and after: ponding flat roof to repaired membrane
AfterBeforeIllustrative scene created to show what a surface view hides and what an inspection reveals. Drag the handle to slide between them.
From first call to finished work.
A clear sequence for every job.
- 01
Identify the membrane
We confirm which membrane you have and its condition.
- 02
Prepare the surface
The damaged area is cleaned and prepared for bonding.
- 03
Patch or weld
Patches are heat-welded or adhered, and seams are re-sealed.
- 04
Probe and check
Seams are probed, and the repair is inspected for completeness.
Services that go together.
D-02CommercialCommercial Flat Roof RepairStorms rip membranes, flood roofs and open seams.Stage 2: Make it safe
C-09RepairsFlat Roof Storm RepairFlat and low-slope roofs hold water, and storms tear membranes, open seams and block drains.Stage 3: Repair it
D-01CommercialCommercial Emergency TarpingA storm that opens a commercial roof threatens inventory, equipment and staff.Stage 1: Stop the water
D-07CommercialWarehouse and Industrial RoofsLarge roofs over stock, machinery and docks cannot wait.Stage 2: Make it safeRead more on this topic.
Flat Roof Leaks After StormsWhy flat roofs leak the way they do, and what to check.2 min read A Commercial Roof Emergency PlanWhat to decide before the storm, so you can act when it hits.2 min read 
Roof Emergencies for Property ManagersHow to triage, communicate and document when several roofs are hit.2 min read TPO and EPDM Emergency Repair FAQ.
Can any membrane be patched?
Most can, if the membrane is sound and the insulation beneath is dry.
Why did my last patch fail?
Wrong materials, poor surface preparation or wet insulation are common reasons.
Is it the end of the roof’s life?
Not necessarily. We tell you what we see about the condition of the whole roof.
TPO and EPDM Emergency Repair across Middle Tennessee.
Pick your city for its page.
Storm hit your roof? Call before the next rain.
Tell us what happened and where you see water. We will explain the safest next step and how we can cover and repair the roof.