Storm-Damaged Flashing Repair in Nashville and Middle Tennessee
Flashing seals every joint on a roof. Storms bend, lift and tear it, and water follows.
- Storm Damage Repair
- Put the roof right
- Middle Tennessee
Storm-Damaged Flashing Repair, explained.
Flashing is the thin metal at chimneys, valleys, walls, vents and edges that turns water away from the joints. Wind bends it, hail dents it and falling debris tears it, and the sealant that holds it ages.
We repair or replace damaged flashing, weave it correctly into the shingles and reseal the details. A well-flashed joint is what keeps a leak from coming back.
Signs you need this
- Flashing is bent, lifted or missing
- Leaks appear near chimneys, valleys or walls
- Sealant at a joint has cracked
- Hail dented metal at the roof joints
A good fit, and what to know.
We would rather you hear the limits from us than discover them later.
A good fit when
- A storm damaged the flashing
- Leaks are tied to a roof joint
- You want a lasting fix instead of caulk
Worth knowing
- Hidden decking damage may need separate repair
- Masonry problems need a mason
Why do it this way.
The cause of many leaks
Flashing repair stops a common source of storm leaks.
Installed properly
Flashing is woven in, not just caulked.
Every detail checked
Chimneys, valleys, walls and vents are inspected.
Photos
You see what was damaged.
Before and after: leaking chimney to new flashing
AfterBeforeIllustrative scene created to show what a surface view hides and what an inspection reveals. Drag the handle to slide between them.
From first call to finished work.
A clear sequence for every job.
- 01
Locate the flashing damage
We inspect every joint and edge for bent, lifted or missing flashing.
- 02
Remove the old
Damaged flashing and failed sealant are removed.
- 03
Install new flashing
New flashing is installed and woven under and over roofing as required.
- 04
Seal and test
Details are sealed and checked for water tightness.
Services that go together.
C-04RepairsChimney Flashing RepairChimneys leak where the roof meets the brick.Stage 3: Repair it
C-03RepairsRoof Valley RepairValleys carry the flow of two roof slopes.Stage 3: Repair it
A-11Emergency ResponseVent and Pipe Boot RepairCracked pipe boots and damaged roof vents let water run straight down into the house.Stage 1: Stop the water
B-01Storm DamageStorm Damage Roof RepairHail, wind, limbs and driven rain damage roofs in different ways.Stage 3: Repair itRead more on this topic.
What to Do When Your Roof Is LeakingA calm, step-by-step guide to the first things to do when water comes through.2 min read 
Temporary vs Permanent Roof RepairWhat each one is, when to use them and how to avoid paying twice.2 min read 
Wind Damage to Roofs, ExplainedHow wind lifts, creases and strips roofing, and where it strikes first.2 min read Flashing Repair FAQ.
Is caulk enough to fix flashing?
Caulk is temporary. Proper flashing repair replaces or re-lays the metal.
How do I know flashing is the problem?
Leaks that follow a joint and visibly damaged metal are strong clues, and we confirm by inspection.
Can flashing be reused?
Sometimes. Bent or corroded flashing is better replaced.
Flashing Repair across Middle Tennessee.
Pick your city for its page.
Storm hit your roof? Call before the next rain.
Tell us what happened and where you see water. We will explain the safest next step and how we can cover and repair the roof.